ZyXEL Communications P-202 manual Display for a Successful Manual Call

Prestige 201 ISDN Access Router

Test	This command triggers the Prestige to perform a loop-back test to check the
	functionality of the ISDN line. If the test is not successful, note the error
	message that you receive and consult your network administrator.
Manual Call	This provides a way for you to place a call to a remote node manually. This
	tests the connectivity to that remote node. When you use this command, the
	screen displays what is happening during the call setup and protocol
	negotiation. Below is an example of a successful connection.
Internet Setup	This test checks to see if your Internet access configuration has been done
Test	correctly. When this option is chosen, the Prestige places a manual call to the
	ISP remote node. If everything is working properly, you will receive an
	appropriate response. Otherwise, note the error message and consult your
	network administrator.
Ping Host	This diagnostic test pings the host, which determines the functionality of the
	TCP/IP protocol on both systems and the links in between.
Reboot System	This option reboots the Prestige.
Command Mode	This option allows you to enter the command mode. This mode allows you to
	diagnose and test your Prestige using a specified set of commands.

The following figure shows an example of a successful connection after selecting option Manual Call in Menu 24.4.

Start dialing for node <1>

### Hit any key to continue. ###

Dialing chan<2> phone<last 9-digit>:12345 Call CONNECT speed<64000> chan<2> prot<1> LCP up

CHAP send response

CHAP login to remote OK! IPCP negotiation started IPCP up

Figure 8-10 Display for a Successful Manual Call

System Maintenance 8-11