Prestige 201 ISDN Access Router
Step 4. Press 'OK' to ignore the 'Username' prompt.
Figure 10-13 Username Prompt
Step 5. To upload the firmware file, transfer the local 'ras' file to overwrite the remote 'ras' file.
To upload the configuration file, transfer the local
Figure 10-14 Files Transfer
The system reboots after a successful upload.
10.3.3 Upload using TFTP
In addition to the direct console port connection, the Prestige supports the up/downloading of the firmware and the configuration file using TFTP (Trivial File Transfer Protocol) over LAN. Even though TFTP should work over WAN as well, it is not recommended because of the potential data corruption problem.
To use TFTP, your workstation must have both telnet and TFTP clients. To transfer the firmware and the configuration file, follow the procedure below:
Backup, Restore and Upload |
|
