|
| |
| Table 21 VoIP (continued) | |
|
|
|
| LABEL | DESCRIPTION |
|
|
|
| SIP Server Port | Enter the SIP server’s listening port for SIP in this field. Leave this field set to the |
|
| default if your VoIP service provider did not give you a server port number for SIP. |
| REGISTER | Enter the SIP register server’s IP address or domain name in this field. You can use |
| Server Address | up to 95 ASCII characters. |
|
| Note: If you were not given a register server address, then enter the |
|
| address from the SIP Server Address field again here. |
| REGISTER | Enter the SIP register server’s listening port for SIP in this field. |
| Server Port |
|
|
| Note: If you were not given a register server port, then enter the port |
|
| from the SIP Server Port field again here. |
| SIP Service | Enter the SIP service domain name in this field (the domain name that comes after |
| Domain | the @ symbol in a full SIP URI). You can use up to 127 ASCII Extended set |
|
| characters. |
| Authentication | This is the user name for registering this SIP account with the SIP register server. |
| User ID | Type the user name exactly as it was given to you. You can use up to 95 ASCII |
|
| characters. |
| Authentication | Type the password associated with the user name above. You can use up to 95 |
| Password | ASCII Extended set characters. |
| Sending Caller | Select this check box to show identification information when you make VoIP phone |
| ID | calls. Clear the check box to not show identification information when you make VoIP |
|
| phone calls. |
| Incoming Call | Phone 1 and Phone 2 correspond to the Prestige’s physical PHONE 1 and 2 ports, |
| apply to | respectively. Select whether you want to receive calls for this SIP account on Phone |
|
| 1, Phone 2 or both. If you select both, you will not know which SIP account a call is |
|
| coming in on. |
| Advanced | Click Settings to open a screen where you can configure the Prestige’s advanced |
| Settings | VoIP settings like SIP server settings, the RTP port range and the coding type. |
| Apply | Click Apply to save your changes back to the Prestige. |
|
|
|
| Reset | Click Reset to begin configuring this screen afresh. |
|
|
|
8.3 Custom Tones (IVR)
IVR (Interactive Voice Response) is a feature that allows you to use your telephone to interact with the Prestige device. The Prestige allows you to record custom tones for the Caller Ringing Tone and On Hold Tone functions. The same recordings apply to both the caller ringing and on hold tones.
Table 22 Custom Tones Details
LABELDESCRIPTION
Total Time for All Tones | 120 seconds for all custom tones combined |
Chapter 8 VoIP Screens | 104 |