P-2302R Series User’s Guide

Several operations that you should be familiar with before you attempt to modify the configuration are listed in the table below.

Table 93 Main Menu Commands

OPERATION

KEYSTROKE

DESCRIPTION

 

 

 

Move down to

[ENTER]

To move forward to a submenu, type in the number of the

another menu

 

desired submenu and press [ENTER].

Move up to a

[ESC]

Press [ESC] to move back to the previous menu.

previous menu

 

 

Move to a “hidden”

Press [SPACE

Fields beginning with “Edit” lead to hidden menus and have

menu

BAR] to change No

a default setting of No. Press [SPACE BAR] once to change

 

to Yes then press

No to Yes, and then press [ENTER] to go to the “hidden”

 

[ENTER].

menu.

Move the cursor

[ENTER] or [UP]/

Within a menu, press [ENTER] to move to the next field. You

 

[DOWN] arrow

can also use the [UP]/[DOWN] arrow keys to move to the

 

keys.

previous and the next field, respectively.

 

 

When you are at the top of a menu, press the [UP] arrow key

 

 

to move to the bottom of a menu.

Entering

Type in or press

You need to fill in two types of fields. The first requires you to

information

[SPACE BAR],

type in the appropriate information. The second allows you

 

then press

to cycle through the available choices by pressing [SPACE

 

[ENTER].

BAR].

Required fields

<? > or ChangeMe

All fields with the symbol <?> must be filled in order to be

 

 

able to save the new configuration.

 

 

All fields with ChangeMe must not be left blank in order to

 

 

be able to save the new configuration.

N/A fields

<N/A>

Some of the fields in the SMT will show a <N/A>. This

 

 

symbol refers to an option that is Not Applicable.

Save your

[ENTER]

Save your configuration by pressing [ENTER] at the

configuration

 

message “Press ENTER to confirm or ESC to cancel”.

 

 

Saving the data on the screen will take you, in most cases to

 

 

the previous menu.

 

 

Make sure you save your settings in each screen that you

 

 

configure.

Exit the SMT

Type 99, then

Type 99 at the main menu prompt and press [ENTER] to exit

 

press [ENTER].

the SMT interface.

After you enter the password, the SMT displays the main menu, as shown next.

225

Chapter 21 Introducing the SMT