P-2302R Series User’s Guide

Figure 6 Enter Password

5You should see a screen asking you to change your password (highly recommended) as shown next. Type a new password (and retype it to confirm) and click Apply or click Ignore.

Figure 7 Change Password

6You should now see the web configurator MAIN MENU screen (Figure 8 on page 47).

Note: The Prestige automatically logs you out if the management session is idle for five minutes. Simply log back in if this happens to you.

2.3 Resetting the Prestige

If you forget your password or cannot access the web configurator, you will need to reload the factory-default configuration file or use the RESET button the back of the Prestige. Uploading this configuration file replaces the current configuration file with the factory-default configuration file. This means that you will lose all configurations that you had previously. The password will also be reset to “1234”.

2.3.1 Procedure To Use The Reset Button

Make sure the PWR/VoIP LED is on (not blinking) before you begin this procedure.

45

Chapter 2 Introducing the Web Configurator