P-2302R Series User’s Guide

Once your schedule sets are configured, you must then apply them to the desired remote node(s). Enter 11 from the Main Menu and then enter the target remote node index. Using [SPACE BAR], select PPPoE or PPPoA in the Encapsulation field and then press [ENTER] to make the schedule sets field available as shown next.

Figure 191 Applying Schedule Set(s) to a Remote Node (PPPoE)

Menu 11.1 - Remote Node Profile

 

Rem Node Name= MyISP

Route= IP

Active= Yes

Edit IP= No

Encapsulation= PPPoE

Service Type= Standard

Telco Option:

Service Name=

Allocated Budget(min)= 0

Outgoing:

Period(hr)= 0

My Login=

Schedules= 1,2,3,4

My Password= ********

Nailed-Up Connection= No

Retype to Confirm= ********

 

Authen= CHAP/PAP

Session Options:

 

Edit Filter Sets= No

Idle Timeout(sec)= 100

Press ENTER to Confirm or ESC to Cancel:

You can apply up to four schedule sets, separated by commas, for one remote node. Change the schedule set numbers to your preference(s).

Chapter 36 Call Scheduling

324