Figure 218 IP Alias
Gateways on the WAN Side
A second solution to the “triangle route” problem is to put all of your network gateways on the WAN side as the following figure shows. This ensures that all incoming network traffic passes through your Prestige to your LAN. Therefore your LAN is protected.
Figure 219 Gateways on the WAN Side
Configuring Triangle Route via Commands
1From the SMT main menu, enter 24.
2Enter “8” in menu 24 to enter CI command mode.
3Use the following command to allow triangle route:
sys firewall ignore triangle all on
or this command to disallow triangle route:
sys firewall ignore triangle all off
Appendix F Triangle Route | 368 |