P-2302R Series User’s Guide

Figure 23 Ethernet Encapsulation

The following table describes the labels in this screen.

Table 15 Ethernet Encapsulation

LABEL

DESCRIPTION

 

 

Encapsulation

You must choose the Ethernet option when the WAN port is used as a regular

 

Ethernet.

Service Type

Choose from Standard, RR-Toshiba(Roadrunner Toshiba authentication

 

method), RR-Manager(Roadrunner Manager authentication method) or RR-

 

Telstra (RoadRunner Telstra authentication method).

User Name

This field is not available if you select the Standard service type. Type the user

 

name given to you by your ISP.

Password

This field is not available if you select the Standard service type. Type the

 

password associated with the user name above.

Retype to Confirm

This field is not available if you select the Standard service type. Type the

 

password again to make sure that you have entered it correctly.

Login Server IP

This field is not available if you select the Standard service type. Type the

Address

authentication server IP address here if your ISP gave you one.

Apply

Click Apply to save your changes back to the Prestige.

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

6.2.2 PPPoE Encapsulation

The Prestige supports PPPoE (Point-to-Point Protocol over Ethernet). PPPoE is an IETF standard (RFC 2516) specifying how a personal computer (PC) interacts with a broadband modem (DSL, cable, wireless, etc.) connection. The PPP over Ethernet option is for a dialup connection using PPPoE.

83

Chapter 6 WAN Screens