P-2302R Series User’s Guide

Table 111 Menu 15.1.1 First Set

FIELD

DESCRIPTION

 

 

Action

The default is Edit. Edit means you want to edit a selected rule (see following field).

 

Insert Before means to insert a rule before the rule selected. The rules after the

 

selected rule will then be moved down by one rule. Delete means to delete the

 

selected rule and then all the rules after the selected one will be advanced one rule.

 

None disables the Select Rule item.

Select Rule

When you choose Edit, Insert Before or Delete in the previous field the cursor jumps

 

to this field to allow you to select the rule to apply the action in question.

Note: You must press [ENTER] at the bottom of the screen to save the whole set. You must do this again if you make any changes to the set – including deleting a rule. No changes to the set take place until this action is taken

Selecting Edit in the Action field and then selecting a rule brings up the following menu, Menu 15.1.1.1 - Address Mapping Rule in which you can edit an individual rule and configure the Type, Local and Global Start/End IPs.

Note: An End IP address must be numerically greater than its corresponding IP Start address

Figure 131 Menu 15.1.1.1 Editing/Configuring an Individual Rule in a Set

Menu 15.1.1.1 Address Mapping Rule

Type= One-to-One

Local IP:

Start=

End = N/A

Global IP:

Start=

End = N/A

Press ENTER to Confirm or ESC to Cancel:

The following table explains the fields in this menu.

Table 112 Menu 15.1.1.1 Editing/Configuring an Individual Rule in a Set

FIELD

DESCRIPTION

 

 

Type

Press [SPACE BAR] and then [ENTER] to select from a total of five types. These are

 

the mapping types discussed in the chapter on NAT web configurator screens. Server

 

allows you to specify multiple servers of different types behind NAT to this computer.

 

See Section 28.5 on page 265 for examples.

Local IP

Only local IP fields are N/A for server; Global IP fields MUST be set for Server.

 

 

Start

This is the starting local IP address (ILA).

 

 

End

This is the ending local IP address (ILA). If the rule is for all local IPs, then put the

 

Start IP as 0.0.0.0 and the End IP as 255.255.255.255. This field is N/A for One-to-

 

One and Server types.

Global IP

 

 

 

263

Chapter 28 Network Address Translation (NAT)