Figure 130 Menu 15.1.1 First Set
Menu 15.1.1 - Address Mapping Rules
Set Name= NAT_SET
Idx Local Start IP Local End IP Global Start IP Global End IP Type
---
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Action= Edit | Select Rule= |
Press ENTER to Confirm or ESC to Cancel:
Note: If the Set Name field is left blank, the entire set will be deleted.
Note: The Type, Local and Global Start/End IPs are configured in menu 15.1.1.1 (described later) and the values are displayed here
28.3.1.2 Ordering Your Rules
Ordering your rules is important because the Prestige applies the rules in the order that you specify. When a rule matches the current packet, the Prestige takes the corresponding action and the remaining rules are ignored. If there are any empty rules before your new configured rule, your configured rule will be pushed up by that number of empty rules. For example, if you have already configured rules 1 to 6 in your current set and now you configure rule number 9. In the set summary screen, the new rule will be rule 7, not 9.
Now if you delete rule 4, rules 5 to 7 will be pushed up by 1 rule, so as old rule 5 becomes rule 4, old rule 6 becomes rule 5 and old rule 7 becomes rule 6.
Table 111 Menu 15.1.1 First Set
FIELD | DESCRIPTION |
|
|
Set Name | Enter a name for this set of rules. This is a required field. If this field is left blank, the |
| entire set will be deleted. |
Chapter 28 Network Address Translation (NAT) | 262 |