P-2302R Series User’s Guide

 

Table 104 Menu 11.1 Remote Node Profile for Ethernet Encapsulation (continued)

 

 

 

 

 

FIELD

DESCRIPTION

 

 

 

 

 

 

Route

This field refers to the protocol that will be routed by your Prestige – IP is the only

 

 

 

option for the Prestige.

 

 

Apply Alias

Press [SPACE BAR] to select an IP alias if you want to use one for this static

 

 

 

route. Leave None selected to use the regular LAN IP address.

 

 

Edit IP

This field leads to a “hidden” menu. Press [SPACE BAR] to select Yes and press

 

 

 

[ENTER] to go to Menu 11.3 - Remote Node Network Layer Options.

 

 

Session Options

 

 

 

 

 

 

 

Edit Filter Sets

This field leads to another “hidden” menu. Use [SPACE BAR] to select Yes and

 

 

 

press [ENTER] to open menu 11.5 to edit the filter sets. See Section 26.4 on page

 

 

 

252 for more details.

 

 

Edit Traffic

Press [SPACE BAR] to select Yes or No.

 

 

Redirect

Select Yes and press [ENTER] to configure Menu 11.6 Traffic Redirect Setup.

 

 

 

Select No (default) if you do not want to configure this feature.

 

 

Once you have configured this menu, press [ENTER] at the message “Press ENTER to Confirm...” to

 

 

save your configuration, or press [ESC] at any time to cancel.

 

26.2.2 PPPoE Encapsulation

The Prestige supports PPPoE (Point-to-Point Protocol over Ethernet). You can only use PPPoE encapsulation when you’re using the Prestige with a DSL modem as the WAN device. If you change the Encapsulation to PPPoE, then you will see the next screen. Please see the appendix for more information on PPPoE.

Chapter 26 Remote Node Configuration

248