Figure 64 Remote Management: WWW
The following table describes the labels in this screen.
Table 46 Remote Management: WWW
LABEL | DESCRIPTION |
|
|
Server Port | You may change the server port number for a service if needed, however you must |
| use the same port number in order to use that service for remote management. |
Server Access | Select the interface(s) through which a computer may access the Prestige using |
| this service. |
Secured Client IP | A secured client is a “trusted” computer that is allowed to communicate with the |
Address | Prestige using this service. |
| Select All to allow any computer to access the Prestige using this service. |
| Choose Selected to just allow the computer with the IP address that you specify to |
| access the Prestige using this service. |
Apply | Click Apply to save your customized settings and exit this screen. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
16.6 SNMP
Simple Network Management Protocol (SNMP) is a protocol used for exchanging management information between network devices. SNMP is a member of the TCP/IP protocol suite. Your Prestige supports SNMP agent functionality, which allows a manager station to manage and monitor the Prestige through the network. The Prestige supports SNMP version one (SNMPv1) and version two (SNMPv2). The next figure illustrates an SNMP management operation. SNMP is only available if TCP/IP is configured.
Note: SNMP is only available if TCP/IP is configured.
Chapter 16 Remote Management Screens | 162 |