P-2302R Series User’s Guide

24.2 TCP/IP Ethernet Setup and DHCP

Use menu 3.2 to configure your Prestige for TCP/IP.

To edit menu 3.2, enter 3 from the main menu to display Menu 3 — LAN Setup. When menu 3 appears, press 2 and press [ENTER] to display Menu 3.2 — TCP/IP and DHCP Ethernet Setup, as shown next:

Figure 113 Menu 3.2 TCP/IP and DHCP Ethernet Setup

Menu 3.2 - TCP/IP and DHCP Ethernet Setup

DHCP= Server

TCP/IP Setup:

Client IP

Pool:

IP Address= 192.168.1.1

Starting Address= 192.168.1.33

Size of

Client IP Pool= 32

IP Subnet Mask= 255.255.255.0

First DNS

Server= From ISP

RIP Direction= Both

IP

Address= N/A

Version= RIP-1

Second DNS Server= From ISP

Multicast= None

IP

Address= N/A

Edit IP Alias= No

Third DNS

Server= From ISP

 

IP

Address= N/A

 

DHCP

Server Address= N/A

 

Press ENTER to Confirm or ESC to Cancel:

Follow the instructions in the next table on how to configure the DHCP fields.

Table 99 DHCP Ethernet Setup Fields

FIELD

DESCRIPTION

 

 

DHCP

This field enables/disables the DHCP server.

 

If set to Server, your Prestige will act as a DHCP server.

 

If set to None, the DHCP server will be disabled.

 

If set to Relay the Prestige acts as a surrogate DHCP server and relays requests

 

and responses between the remote server and the clients.

 

When set to Server, the following items need to be set:

 

 

Client IP Pools

 

 

 

Starting Address

This field specifies the first of the contiguous addresses in the IP address pool.

 

 

Size of Client IP

This field specifies the size, or count of the IP address pool.

Pool

 

237

Chapter 24 LAN Setup