CHAPTER 31
SNMP Configuration
This chapter explains SNMP Configuration menu 22.
31.1 SNMP Introduction
See Section 16.6 on page 162 for background information on SNMP.
31.2 SNMP Configuration
To configure SNMP, select option 22 from the main menu to open Menu 22 — SNMP Configuration as shown next. The “community” for Get, Set and Trap fields is SNMP terminology for password.
Figure 163 Menu 22 SNMP Configuration
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
The following table describes the SNMP configuration parameters.
Table 118 Menu 22 SNMP Configuration
FIELD | DESCRIPTION |
|
|
SNMP: |
|
Get Community | Type the Get Community, which is the password for the incoming Get- and |
| GetNext requests from the management station. |
Set Community | Type the Set community, which is the password for incoming Set requests from |
| the management station. |
Trusted Host | If you enter a trusted host, your Prestige will only respond to SNMP messages |
| from this address. A blank (default) field means your Prestige will respond to all |
| SNMP messages it receives, regardless of source. |
Chapter 31 SNMP Configuration | 290 |