P-2302R Series User’s Guide

Figure 138 NAT Example 3

1In this case you need to configure Address Mapping Set 1 from Menu 15.1 - Address Mapping Sets. Therefore you must choose the Full Feature option from the Network Address Translation field (in menu 4 or menu 11.3). See Figure 119 on page 251.

2Then enter 15 from the main menu.

3Enter 1 to configure the Address Mapping Sets.

4Enter 1 to begin configuring this new set. Enter a Set Name, choose the Edit Action and then enter 1 for the Select Rule field. Press [ENTER] to confirm.

5Select Type as One-to-One(direct mapping for packets going both ways), and enter the local Start IP as 192.168.1.10 (the IP address of FTP Server 1), the global Start IP as 10.132.50.1 (our first IGA). See Figure 140 on page 269.

6Repeat the previous step for rules 2 to 4 as outlined above.

7When finished, menu 15.1.1.1 should look like as shown in Figure 141 on page 269.

Figure 139 NAT Example 3: Menu 11.3

Menu 11.3 - Remote Node Network Layer Options

IP Address Assignment= Dynamic

IP Address= N/A

IP Subnet Mask= N/A

Gateway IP Addr= N/A

Network Address Translation = Full Feature

Metric= 1

Private= N/A

RIP Direction= None

Version= N/A

Multicast= None

Enter here to CONFIRM or ESC to CANCEL:

The following figures show how to configure the first rule.

Chapter 28 Network Address Translation (NAT)

268