P-2302R Series User’s Guide

Figure 135 Menu 4 Internet Access & NAT Example

Menu 4 - Internet Access Setup

ISP's Name= MyISP

Encapsulation= Ethernet

Service Type= Standard

My Login= N/A

My Password= N/A

Retype to Confirm= N/A

Login Server= N/A

IP Address Assignment= Dynamic

IP Address= N/A

IP Subnet Mask= N/A

Gateway IP Address= N/A

Network Address Translation = SUA Only

Press ENTER to Confirm or ESC to Cancel:

From menu 4, choose the SUA Only option from the Network Address Translation field. This is the Many-to-One mapping discussed in Section 28.5 on page 265. The SUA Only read-only option from the Network Address Translation field in menus 4 and 11.3 is specifically pre-configured to handle this case.

28.5.2 Example 2: Internet Access with an Inside Server

The dynamic Inside Global Address is assigned by the ISP.

Figure 136 NAT Example 2

In this case, you do exactly as above (use the convenient pre-configured SUA Only set) and also go to menu 15.2 to specify the Inside Server behind the NAT as shown in the next figure.

Chapter 28 Network Address Translation (NAT)

266