P-2302R Series User’s Guide

Figure 118 Menu 11.1 Remote Node Profile for PPPoE Encapsulation

Menu 11.1 - Remote Node Profile

Rem Node Name= MyISP

Route= IP

Active= Yes

Apply Alias= Alias 1

Encapsulation= PPPoE

Edit IP= No

Service Type= Standard

Telco Option:

Service Name=

Allocated Budget(min)= 0

Outgoing:

Period(hr)= 0

My Login=

Schedules=

My Password= ********

Nailed-Up Connection= No

Retype to Confirm= ********

 

Authen= CHAP/PAP

 

Session Options:

Edit Filter Sets= No

Idle Timeout(sec)= 0

Edit Traffic Redirect= No

Press ENTER to Confirm or ESC to Cancel:

26.2.2.1 Outgoing Authentication Protocol

Generally speaking, you should employ the strongest authentication protocol possible, for obvious reasons. However, some vendor’s implementation includes a specific authentication protocol in the user profile. It will disconnect if the negotiated protocol is different from that in the user profile, even when the negotiated protocol is stronger than specified. If you encounter a case where the peer disconnects right after a successful authentication, please make sure that you specify the correct authentication protocol when connecting to such an implementation.

26.2.2.2 Nailed-Up Connection

A nailed-up connection is a dial-up line where the connection is always up regardless of traffic demand. The Prestige does two things when you specify a nailed-up connection. The first is that idle timeout is disabled. The second is that the Prestige will try to bring up the connection when turned on and whenever the connection is down. A nailed-up connection can be very expensive for obvious reasons.

Do not specify a nailed-up connection unless your telephone company offers flat-rate service or you need a constant connection and the cost is of no concern.

249

Chapter 26 Remote Node Configuration