CHAPTER 24
LAN Setup
This chapter covers how to configure your wired Local Area Network (LAN) settings.
24.1 LAN Setup
This chapter describes how to configure the Ethernet using Menu 3 — LAN Setup. From the main menu, enter 3 to display menu 3. See Chapter 5 on page 72 for background information.
Figure 111 Menu 3 LAN Setup
Menu 3 - LAN Setup
1.LAN Port Filter Setup
2.TCP/IP and DHCP Setup
Enter Menu Selection Number:
24.1.1 General Ethernet Setup
This menu allows you to specify filter set(s) that you wish to apply to the Ethernet traffic. You seldom need to filter Ethernet traffic; however, the filter sets may be useful to block certain packets, reduce traffic and prevent security breaches
Figure 112 Menu 3.1 LAN Port Filter Setup.
Menu 3.1 - LAN Port Filter Setup
Input Filter Sets: protocol filters= device filters= Output Filter Sets: protocol filters= device filters=
Press ENTER to Confirm or ESC to Cancel:
If you need to define filters, please read Chapter 30 on page 276 first, then return to this menu to define the filter sets.
Chapter 24 LAN Setup | 236 |