1Press the RESET button for five to ten seconds (release it when the PWR/VoIP LED begins to blink). When the PWR/VoIP LED starts blinking, the defaults have been restored and the Prestige restarts. Otherwise, go to step 2.
2Disconnect and reconnect the Prestige’s power.
3Wait for the PWR/VoIP LED to stop blinking and stay on steady.
4Press the RESET button for five to ten seconds (release it when the PWR/VoIP LED begins to blink). When the PWR/VoIP LED starts blinking, the defaults have been restored and the Prestige restarts. Otherwise, go to step 2.
2.4Navigating the Prestige Web Configurator
The following summarizes how to navigate the web configurator from the MAIN MENU screen.
Note: Click the Help icon (located in the top right corner of most screens) to view online help.
•Click WIZARD for initial configuration.
•Click a link under ADVANCED to configure Prestige features.
•Click MAINTENANCE to view information about your Prestige or upgrade configuration/firmware files. Maintenance includes the Status, DHCP Table, F/W (firmware) Upload, Configuration (Backup, Restore, Defaults) and Restart screens.
•Click LOGOUT at any time to exit the web configurator.
Chapter 2 Introducing the Web Configurator | 46 |