P-2302R Series User’s Guide

19.11 Configuring Class Setup

The class setup screen displays the configured bandwidth classes by individual interface. Select an interface and click the buttons to perform the actions described next. Click “+” to expand the class tree or click “-” to collapse the class tree. Each interface has a permanent root class. The bandwidth budget of the root class is equal to the speed you configured on the interface (see Section 19.10 on page 203 to configure the speed of the interface). Configure sub-classes for the root class. A default class automatically displays for all the bandwidth in the Root Class that is not allocated to bandwidth classes.

To add or delete child classes on an interface, click BW MGMT, then the Class Setup tab. The screen appears as shown (with example classes).

Figure 88 Bandwidth Manager: Class Setup

The following table describes the labels in this screen.

Table 82 Bandwidth Manager: Class Setup

LABEL

DESCRIPTION

 

 

Class Setup

 

 

 

Interface

Select an interface from the drop-down list box for which you wish to set up classes.

 

Bandwidth management controls outgoing traffic on an interface, not incoming. In

 

order to limit the download bandwidth of the LAN users, set the bandwidth

 

management class on the LAN. In order to limit the upload bandwidth, set the

 

bandwidth management class on the corresponding WAN interface.

Add Sub-Class

Click Add Sub-classto add a sub-class.

 

 

Edit

Click Edit to configure the selected class. You cannot edit the root class.

 

 

Delete

Click Delete to delete the class and all its sub-classes. You cannot delete the root

 

class.

Statistics

Click Statistics to display the status of the selected class.

 

 

205

Chapter 19 Bandwidth Management