P-2302R Series User’s Guide

CHAPTER 21

Introducing the SMT

This chapter explains how to access and navigate the System Management Terminal and gives an overview of its menus.

21.1 SMT Introduction

The Prestige’s SMT (System Management Terminal) is a menu-driven interface that you can access through a telnet connection. This chapter shows you how to access the SMT (System Management Terminal) menus, how to navigate the SMT and how to configure SMT menus.

21.2 Accessing the SMT via Telnet

The following procedure details how to telnet into your Prestige.

1In Windows, click Start (usually in the bottom left corner), Run and then type “telnet 192.168.1.1” (the default IP address) and click OK.

2For your first login, enter the default password “1234”. As you type the password, the screen displays an asterisk “*” for each character you type.

Figure 105 Login Screen

Password : xxxx

3After entering the password you will see the main menu.

Please note that if there is no activity for longer than five minutes (default timeout period) after you log in, your Prestige will automatically log you out. You will then have to telnet into the Prestige again. You can use the web configurator or the CI commands to change the inactivity time out period.

21.3 Navigating the SMT Interface

The SMT (System Management Terminal) is the interface that you use to configure your Prestige.

Chapter 21 Introducing the SMT

224