ZyXEL Communications P-2302R Series 9.3.3USA Type Supplementary Services, 9.3.2.3European Call Transfer, 9.3.2.4European Three-WayConference, USA Type Call Service Mode

P-2302R Series User’s Guide

•Put the first call on hold and answer the second call. Press the flash key and then “2”.

9.3.2.3European Call Transfer

Do the following to transfer an incoming call (that you have answered) to another phone.

1Press the flash key to put the caller on hold.

2When you hear the dial tone, dial “*98#” followed by the number to which you want to transfer the call. to operate the Intercom.

3After you hear the ring signal or the second party answers it, hang up the phone.

9.3.2.4European Three-Way Conference

Use the following steps to make three-way conference calls.

1When you are on the phone talking to someone, place the flash key to put the caller on hold and get a dial tone.

2Dial a phone number directly to make another call.

3When the second call is answered, press the flash key and press “3” to create a three-way conversation.

4Hang up the phone to drop the connection.

5If you want to separate the activated three-way conference into two individual connections (one is on-line, the other is on hold), press the flash key and press “2”.

9.3.3USA Type Supplementary Services

This section describes how to use supplementary phone services with the USA Type Call Service Mode. Commands for supplementary services are listed in the table below.

After pressing the flash key, if you do not issue the sub-command before the default sub- command timeout (2 seconds) expires or issue an invalid sub-command, the current operation will be aborted.

Table 27 USA Type Flash Key Commands

COMMAND	SUB-COMMAND	DESCRIPTION
Flash		Put a current call on hold to place a second call. After the second
		call is successful, press the flash key again to have a three-way
		conference call.
		Put a current call on hold to answer an incoming call.
Flash	*98#	Transfer the call to another phone.

Chapter 9 Phone 116