LABEL | DESCRIPTION |
|
|
Display | Select a log category from the drop down list box to display logs within the |
| selected category. To view all logs, select All Logs. |
| The number of categories shown in the drop down list box depends on the |
| selection in the Log Settings page. |
Email Log Now | Click Email Log Now to send the log screen to the |
| the Log Settings page. |
Refresh | Click Refresh to renew the log screen. |
|
|
Clear Log | Click Clear Log to clear all the logs. |
|
|
Time | This field displays the time the log was recorded. |
|
|
Message | This field states the reason for the log. |
|
|
Source | This field lists the source IP address and the port number of the incoming |
| packet. |
Destination | This field lists the destination IP address and the port number of the incoming |
| packet. |
Notes | This field displays additional information about the log entry. |
|
|
The following tables provide descriptions of example log messages.
Table 55 System Error Logs
LOG MESSAGE | DESCRIPTION |
|
|
WAN connection is down. | The WAN connection is down. You cannot access the network |
| through this interface. |
%s exceeds the max. | This attempt to create a NAT session exceeds the maximum |
number of session per | number of NAT session table entries allowed to be created per |
host! | host. |
Table 56 System Maintenance Logs
LOG MESSAGE | DESCRIPTION |
|
|
Time calibration is | The device has adjusted its time based on information from |
successful | the time server. |
Time calibration failed | The device failed to get information from the time server. |
WAN interface gets IP: %s | The WAN interface got a new IP address from the DHCP or |
| PPPoE server. |
DHCP client gets %s | A DHCP client got a new IP address from the DHCP server. |
DHCP client IP expired | A DHCP client's IP address has expired. |
DHCP server assigns %s | The DHCP server assigned an IP address to a client. |
185 | Chapter 18 Logs |