Husqvarna 128CD Safety Instructions, Personal protective equipment, Machine’s safety equipment

Page 4

SAFETY INSTRUCTIONS

Personal protective equipment

WARNING: Whenever you use a clearing saw, brushcutter or trimmer you must wear personal protective equipment that is approved by the authorities. Personal protective equipment does not eliminate the risk of accidents, but it can reduce the ef- fects of an injury in the event of an accident. Ask your dealer for help when choosing protective equipment.

IMPORTANT! Listen for warning signals or shouts when you are wearing hearing protection. Always remove your hearing protection as soon as the engine stops.

GLOVES

Gloves should be worn when necessary, e.g., when fitting cutting attachments.

HEARING PROTECTION

Wear hearing protection that provides adequate noise reduction.

EYE PROTECTION

Always wear approved eye protection. If you use a visor then you must also wear approved protective goggles. Approved protective goggles must comply with standard ANSI Z87.1.

BOOTS

Wear sturdy, non--slip boots.

CLOTHING

Wear clothes made of a strong fabric and avoid loose clothing that can catch on twigs and branches. Always wear heavy, long pants. Do not wear jewelry, shorts sandals or go barefoot. Secure hair so it is above shoulder level.

FIRST AID KIT

Always have a first aid kit nearby.

Machine’s safety equipment

This section describes the machine’s safe- ty equipment, its purpose, and how checks and maintenance should be carried out to ensure that it operates correctly. See the “Know your trimmer ” section to locate where this equipment is positioned on your machine.

The life span of the machine can be reduced and the risk of accidents can increase if machine maintenance is not carried out correctly and if service and/or repairs are not carried out professionally. If you need further information please contact your nearest ser- vicing dealer.

WARNING: Never use a machine that has faulty safety equipment! Carry out the inspection, mainte- nance and service routines listed in this section.

Throttle lock-out

The throttle lock--out is designed to prevent accidental operation of the throttle control. When you press the lock--out (A) (i.e. when you grasp the handle) it releases the throttle control (B). When you release the handle the throttle control and the throttle lock--out both move back to their original positions. This movement is controlled by two independent return springs. This ar- rangement means that the throttle control is automatically locked at the idle setting.

A

B

Stop switch

Make sure the engine stops when you push and hold the stop switch.

115374327 Rev. 6 5/31/12

English--- 4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Page Contents Symbols KEY to SymbolsRev 5/31/12 Only intended for trimmer heads Safety Instructions Machine’s safety equipmentStop switch Personal protective equipmentCutting attachment guard MufflerCutting equipment Trimmer head is intended for trimming grassReturn springs work properly General rules Trimmer headTrimmer line of the same diameter General safety precautions Safety instructions regarding the surroundingsSafety instructions before starting work Personal protectionFuel safety Basic safety rulesGeneral working instructions StartingClearing Basic working techniquesCutting Sweeping 128LD 128CD Know Your TrimmerKnow your trimmer Assembly Fitting the loop handleAssembling and dismantling the two--piece shaft Fitting the trimmer guard and trimmer head Model 128LDFitting the trimmer guard and trimmer head Model 128CD Fuel mixture Fuel HandlingFueling Starting and Stopping Check before startingStarting and stopping Cold engineWarm engine StoppingMaintenance Unit/Maintenance SafetyCarburetor MufflerCleaning the air filter Spark plugTwo--piece shaft Air filterMaintenance schedule Daily maintenanceWeekly maintenance Monthly maintenanceTrimmer Head Line Loading Instructions Technical Data Technical dataWarranty Commencement Date Contenu ContenuContrôler les points suivants avant la mise en marche Avertissement Utilisés deExplication DES Symboles SymbolesDestiné uniquement aux têtes de coupe Un nettoyage régulier est indispensable Examen visuelInstructions DE Sécurité Équipement de sécurité de la machineBlocage de l’accélération Utiliser des bottes antidéparapantes et stablesAvertissement L’intérieur Avertissement Une exAvertissement Les gaz Instructions DE Sécurité Tête de coupe Règles élémentairesAvertissement Toujours Instructions générales de sécuritéProtection personnelle Consignes de sécurité pour l’entourageConsignes de sécurité avant la mise en service Avertissement Lorsque leSécurité carburant Sécurité du mise en marcheAvertissement Manipuler Méthodes de travailTechniques de travail de base Avertissement Il arrive queCoupe Avertissement AttentionBalayage FAMILIARISEZ-VOUS Avec Votre Appareil Familiarisez-vous avec votre appareilBouton d’arrêt Huile à 2 temps Manuel d’instructions EPAMontage Montage de la poignée en boucleMontage et démontage d’un tube de transmission démontable Avertissement Tous lesManipulation DU Carburant Montage du protecteur et la tête de coupe Modèle 128CDCarburant Avertissement Le carbuAvertissement Le pot Remplissage de carburant Avertissement Les meMélange Min m 10 ftDémarrage ET Arrêt Contrôles avant la mise en marcheDémarrage et arrêt Avertissement Un couv Moteur froidMoteur chaud ArrêtEntretien Bougie Tube de transmission démontableFiltre à air Vis de silencieux Grille pare--étincellesRenvoi d’angle 128LD Schéma d’entretienRemplacement du fil dans la tête de coupe Caractéristiques Techniques Caractéristiques techniquesAccessoires Numéro de la pièce Droits ET Obligations DE Votre GarantieADD-ON or Modified Parts Durée DE Couverture Contenido ContenidoAntes de arrancar, observe lo siguiente Advertencia Una desbrozaIdentificacion DE Simbolos SímbolosInstrucciones DE Seguridad Equipo de protección personal Advertencia Para trabajarEquipo de seguridad de la máquina Advertencia Nunca utiliceAdvertencia La sobre ex Advertencia Bajo ningunaAdvertencia Los humos de Interruptor de parada ¡IMPORTANTEAdvertencia Pare siempre Cabezal de corteObtener un resultado de corte óptimo Reglas básicasInstrucciones generales de seguridad Advertencia Un equipo deProtección personal Instrucciones de seguridad para el entornoAdvertencia Cuando el Seguridad en el uso del com- bustibleAdvertencia Sea cuidadoso Seguridad de arranqueInstrucciones generales de trabajo Técnica básicas de trabajoAdvertencia a veces, se Reglas básicas de seguridadCorte BarridoConozca SU Aparato Conozca su aparatoMontaje Montaje de mango de tipo cerradoMontaje y desmontaje del tubo divisible Montaje de la protector y la cabezal de corte Modelo 128LDMontaje de la protector y la cabezal de corte Modelo 128CD Rodeada por el protector de polvoCarburante Manipulacion DEL CombustibleAdvertencia El combus Problemas de funcionamiento RepostajeArranque Y Parada Control antes de arrancarArranque y parada Advertencia Antes de ar Motor frioMotor caliente Mantenimiento CarburadorAdvertencia Si no puede Seguridad del aparato y su mantenimientoBujía Tubo divisibleFiltro de aire Mm 0,024 de pulgadaEngranaje angulado 128LD Programa de mantenimientoReemplazo de la línea en el cabezal de corte Datos Tecnicos Datos técnicosAccessorios Número de pieza Accesorio del cortadora de ramas, con tubo 952 711Fecha DEL Comienza DE LA Garantia
Related manuals
Manual 4 pages 16.46 Kb Manual 7 pages 30.43 Kb Manual 4 pages 15.86 Kb

128CD, 128LD specifications

The Husqvarna 128LD is a versatile, user-friendly outdoor tool designed to make yard work easier and more efficient. Known for its lightweight design and robust performance, this multi-purpose trimmer is part of Husqvarna's extensive lineup of outdoor power equipment, aimed at both homeowners and professional landscapers.

One of the standout features of the 128LD is its powerful 28cc, 2-stroke engine. This engine provides a perfect blend of performance and fuel efficiency, delivering the power needed to tackle tough grass and weeds while minimizing fuel consumption. The smart design also includes an easy-starting system that reduces the effort required to start the machine, ensuring you can get to work without frustration.

The 128LD is not just a trimmer, but a multi-tool system that accommodates various attachments, such as a blower, edger, and cultivator. This versatility makes it an ideal choice for homeowners looking to maintain their gardens and yards with minimal equipment. The detachable shaft allows for easy swapping of attachments, ensuring that you have the right tool for any task.

Equipped with an adjustable handle, the Husqvarna 128LD promotes comfort and efficiency during use. The soft-grip handle minimizes vibration, allowing you to work longer without discomfort. Additionally, the curved shaft design enhances reach and precision, making it easier to trim around flower beds, pathways, and other narrow spaces.

Another critical feature of the 128LD is its dual line cutting system. This system allows for a wide cutting swath, effectively reducing the time spent on yard work. The patented Tap 'n Go trimmer head enables easy line adjustment, letting you extend the cutting line simply by tapping the head on the ground, ensuring you're always ready to work without interruptions.

In terms of durability, the Husqvarna 128LD is built to last. High-quality materials and construction ensure it can withstand the rigors of outdoor use, providing reliable performance over time.

Overall, the Husqvarna 128LD stands out as a powerful and versatile multitool that caters to a broad range of outdoor maintenance needs, making it a valuable addition to any homeowner's gardening arsenal. Whether you're trimming grass, edging pathways, or tackling tougher overgrown areas, the 128LD delivers reliability and ease of use in one efficient package.
Top Page Image Contents