Husqvarna 128LD, 128CD manual Trimmer head, General rules, Trimmer line of the same diameter

Page 7

SAFETY INSTRUCTIONS

Cutting equipment

This section describes how to choose and maintain your cutting equipment in order to:

SObtain maximum cutting performance. S Extend the life of cutting equipment.

General rules:

1.Only use cutting attachments with the guards we recommend! See the section on “Technical Data”.

2.Check the cutting attachment for damage or cracks. A damaged cutting attachment should always be replaced.

WARNING: Never use a machine with faulty safety equipment. The machine’s safety equipment must be checked and maintained as described in this section. If your machine fails any of these checks contact your servicing dealer to get it repaired. Use of a machine with faulty safety equipment increases the risk of serious personal injury to the operator or others.

IMPORTANT!

This section describes how to choose and maintain your cutting equipment in order to: Obtain maximum cutting performance.

Extend the life of cutting equipment.

Only use cutting attachments with the guards we recommend! See the section on “Technical data”.

Refer to the instructions for the cutting attach- ment to check the correct way to load the trimmer line and the correct line diameter.

115374327 Rev. 6 5/31/12

Trimmer head

SOnly use the recommended cutting at- tachments. See the section on “Technical data”.

SSmaller machines generally require small trimmer heads and vice versa. This is be- cause when clearing using trimmer line the engine must throw out the trimmer line radially from the trimmer head and overcome the resistance of the grass being cleared.

SThe length of the trimmer line is also im- portant. A longer trimmer line requires greater engine power than a shorter

trimmer line of the same diameter.

SMake sure that the cutter on the trimmer guard is intact. This is used to cut the

trimmer line to the correct length.

STo increase the life of the trimmer line it can be soaked in water for a couple of days. This will make the line tougher so that it lasts longer.

IMPORTANT!

Always ensure the trimmer line is wound tightly and evenly around the drum, other- wise the machine will generate harmful vibration.

WARNING: Always stop the en- gine before doing any work on the cutting attachment. This continues to rotate even after the throttle has been released. Ensure that the cutting attachment has stopped completely and disconnect the lead from the spark plug before you start to work on it.

English--- 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Page Contents Symbols KEY to SymbolsRev 5/31/12 Only intended for trimmer heads Personal protective equipment Safety InstructionsMachine’s safety equipment Stop switchTrimmer head is intended for trimming grass Cutting attachment guardMuffler Cutting equipmentReturn springs work properly General rules Trimmer headTrimmer line of the same diameter Personal protection General safety precautionsSafety instructions regarding the surroundings Safety instructions before starting workStarting Fuel safetyBasic safety rules General working instructionsClearing Basic working techniquesCutting Sweeping 128LD 128CD Know Your TrimmerKnow your trimmer Fitting the trimmer guard and trimmer head Model 128LD AssemblyFitting the loop handle Assembling and dismantling the two--piece shaftFitting the trimmer guard and trimmer head Model 128CD Fuel mixture Fuel HandlingFueling Cold engine Starting and StoppingCheck before starting Starting and stoppingStopping Warm engineMuffler MaintenanceUnit/Maintenance Safety CarburetorAir filter Cleaning the air filterSpark plug Two--piece shaftMonthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceTrimmer Head Line Loading Instructions Technical data Technical DataWarranty Commencement Date Avertissement Utilisés de ContenuContenu Contrôler les points suivants avant la mise en marcheUn nettoyage régulier est indispensable Examen visuel Explication DES SymbolesSymboles Destiné uniquement aux têtes de coupeUtiliser des bottes antidéparapantes et stables Instructions DE SécuritéÉquipement de sécurité de la machine Blocage de l’accélérationAvertissement L’intérieur Avertissement Une exAvertissement Les gaz Instructions DE Sécurité Règles élémentaires Tête de coupeConsignes de sécurité pour l’entourage Avertissement ToujoursInstructions générales de sécurité Protection personnelleSécurité du mise en marche Consignes de sécurité avant la mise en serviceAvertissement Lorsque le Sécurité carburantAvertissement Il arrive que Avertissement ManipulerMéthodes de travail Techniques de travail de baseCoupe Avertissement AttentionBalayage Manuel d’instructions EPA FAMILIARISEZ-VOUS Avec Votre AppareilFamiliarisez-vous avec votre appareil Bouton d’arrêt Huile à 2 tempsAvertissement Tous les MontageMontage de la poignée en boucle Montage et démontage d’un tube de transmission démontableAvertissement Le carbu Manipulation DU CarburantMontage du protecteur et la tête de coupe Modèle 128CD CarburantMin m 10 ft Avertissement Le potRemplissage de carburant Avertissement Les me MélangeMoteur froid Démarrage ET ArrêtContrôles avant la mise en marche Démarrage et arrêt Avertissement Un couvArrêt Moteur chaudEntretien Vis de silencieux Grille pare--étincelles BougieTube de transmission démontable Filtre à airSchéma d’entretien Renvoi d’angle 128LDRemplacement du fil dans la tête de coupe Caractéristiques techniques Caractéristiques TechniquesDroits ET Obligations DE Votre Garantie Accessoires Numéro de la pièceADD-ON or Modified Parts Durée DE Couverture Advertencia Una desbroza ContenidoContenido Antes de arrancar, observe lo siguienteSímbolos Identificacion DE SimbolosAdvertencia Nunca utilice Instrucciones DE SeguridadEquipo de protección personal Advertencia Para trabajar Equipo de seguridad de la máquinaAdvertencia La sobre ex Advertencia Bajo ningunaAdvertencia Los humos de ¡IMPORTANTE Interruptor de paradaReglas básicas Advertencia Pare siempreCabezal de corte Obtener un resultado de corte óptimoInstrucciones de seguridad para el entorno Instrucciones generales de seguridadAdvertencia Un equipo de Protección personalSeguridad de arranque Advertencia Cuando elSeguridad en el uso del com- bustible Advertencia Sea cuidadosoReglas básicas de seguridad Instrucciones generales de trabajoTécnica básicas de trabajo Advertencia a veces, seBarrido CorteConozca su aparato Conozca SU AparatoMontaje de la protector y la cabezal de corte Modelo 128LD MontajeMontaje de mango de tipo cerrado Montaje y desmontaje del tubo divisibleRodeada por el protector de polvo Montaje de la protector y la cabezal de corte Modelo 128CDCarburante Manipulacion DEL CombustibleAdvertencia El combus Repostaje Problemas de funcionamientoMotor frio Arranque Y ParadaControl antes de arrancar Arranque y parada Advertencia Antes de arMotor caliente Seguridad del aparato y su mantenimiento MantenimientoCarburador Advertencia Si no puedeMm 0,024 de pulgada BujíaTubo divisible Filtro de airePrograma de mantenimiento Engranaje angulado 128LDReemplazo de la línea en el cabezal de corte Datos técnicos Datos TecnicosAccesorio del cortadora de ramas, con tubo 952 711 Accessorios Número de piezaFecha DEL Comienza DE LA Garantia
Related manuals
Manual 4 pages 16.46 Kb Manual 7 pages 30.43 Kb Manual 4 pages 15.86 Kb

128CD, 128LD specifications

The Husqvarna 128LD is a versatile, user-friendly outdoor tool designed to make yard work easier and more efficient. Known for its lightweight design and robust performance, this multi-purpose trimmer is part of Husqvarna's extensive lineup of outdoor power equipment, aimed at both homeowners and professional landscapers.

One of the standout features of the 128LD is its powerful 28cc, 2-stroke engine. This engine provides a perfect blend of performance and fuel efficiency, delivering the power needed to tackle tough grass and weeds while minimizing fuel consumption. The smart design also includes an easy-starting system that reduces the effort required to start the machine, ensuring you can get to work without frustration.

The 128LD is not just a trimmer, but a multi-tool system that accommodates various attachments, such as a blower, edger, and cultivator. This versatility makes it an ideal choice for homeowners looking to maintain their gardens and yards with minimal equipment. The detachable shaft allows for easy swapping of attachments, ensuring that you have the right tool for any task.

Equipped with an adjustable handle, the Husqvarna 128LD promotes comfort and efficiency during use. The soft-grip handle minimizes vibration, allowing you to work longer without discomfort. Additionally, the curved shaft design enhances reach and precision, making it easier to trim around flower beds, pathways, and other narrow spaces.

Another critical feature of the 128LD is its dual line cutting system. This system allows for a wide cutting swath, effectively reducing the time spent on yard work. The patented Tap 'n Go trimmer head enables easy line adjustment, letting you extend the cutting line simply by tapping the head on the ground, ensuring you're always ready to work without interruptions.

In terms of durability, the Husqvarna 128LD is built to last. High-quality materials and construction ensure it can withstand the rigors of outdoor use, providing reliable performance over time.

Overall, the Husqvarna 128LD stands out as a powerful and versatile multitool that caters to a broad range of outdoor maintenance needs, making it a valuable addition to any homeowner's gardening arsenal. Whether you're trimming grass, edging pathways, or tackling tougher overgrown areas, the 128LD delivers reliability and ease of use in one efficient package.
Top Page Image Contents