DeVillbiss Air Power Company VR1600E, A17913 Connected to a potable water system

5.Test GFCI switch before each use, to test:

a.Press test button (b), indicator light will disappear.

c.Press reset button (c) to use unit. If indicator light does not reappear DO NOT use unit, see troubleshooting guide.

6.Connect the high pressure hose (i) to the water outlet on the unit. The water outlet is marked OUT.

7.Assemble quick-connect adapter (k) to water inlet.

i

k

8.Connect the quick-connect (j) to the water supply hose.

Risk of property damage. To reduce the possibility of contamination always protect against backflow when

connected to a potable water system.

9.Connect quick-connect (j) to quick connect adapter (k) at the water inlet.

j	k
	j

NOTE: The water supply must provide a minimum of 5 gallons per minute.

10.Make sure high pressure hose and water supply hose are securely connected.

Risk of fluid injection and laceration. Always relieve system pressure before changing

accessories. Place on/off switch in off a position, turn off water supply, and pull gun

trigger until water stops flowing.

b

11.Connect the desired nozzle to spray wand. To connect rotary (a) and variable

spray nozzle (b), turn clockwise until it	c
snaps into place. To remove nozzle, turn
nozzle counter clockwise to remove. To
connect chemical application unit (c)
see How To Use Cleaning Solution
Application Unit in this section.

12.Turn water supply on.

A17913 12- ENG