
Sending a Delayed Fax From Memory
SELECT | 1 | DELAYED TX DATE | |
FUNCTION | |||
|
+ | [07/01] YES( ) NO ( ) |
| DELAYD |
| TX |
1Load your documents.
2Press the SELECT FUNCTION key.
3Press the 1/DELAYED TX
DELAYED TX and today’s date.
4Press NO . The display shows DELAYED TX DATE. Or, if the transmission is to occur on
the same day, press | YES | and go to Step 6. |
5Using the numeric keypad, enter the date on which you wish the transmission to begin.
6Press YES . The display shows DELAYED TX TIME.
7Using the numeric keypad, enter the time on which you wish the transmission to begin.
Tip: Be sure to enter the time using the 24- hour clock (i.e., 8:00 a.m. would be entered as 08:00, and 8:00 p.m. would be entered as 20:00).
8Press YES . The display shows SELECT LOCATIONS.
9Select a location. Refer to the instructions below.
To Select Using | Do This |
A | Press the |
| |
An Auto Dial number | Press the AUTO |
| DIAL key, then enter |
| the three digit Auto |
| Dial number on |
| the numeric keypad. |
A number dialed on | Dial as you would |
the numeric keypad | on a normal tele- |
| phone. |
10Press the START key to finish the program- ming.
Canceling a Delayed Transmission
To cancel a delayed transmission from the docu- ment feeder or from memory before it has been sent, follow the instructions below.
1Press the STOP key. The display shows
COMMUNICATION CANCEL.
2Press YES . The display shows the Loca- tion ID of the delayed transmission currently loaded in your machine.
3 Press | YES | . |
4If the delayed transmission was a feeder transmission, press the STOP key again to remove the document from the document feeder.
Advanced Operations | 45 |