Codes Used in Reports
Result Codes
Result codes indicate the results of communica- tions.
Code | Description |
BUSY | The other machine’s line was busy or there |
| was no answer. |
CANCL | A message was erased after being held in |
| memory for 10 days. |
COMP. | A |
| completed. |
COVER | The fax machine’s cover was opened |
| during the communication. |
NO | The transmission or reception failed due to |
| a communication error. |
OK | The communication was completed |
| successfully. |
PUNIT | This error code indicates a problem with |
| the printing unit. Contact your service |
| person. |
R_JAM | A paper jam occurred in your machine |
| while it was receiving a fax, and your fax |
| machine was unable to receive the entire |
| message in memory. |
S_JAM | A document jam occurred in the sending |
| fax machine. |
STOP | The STOP key was pressed, ending the |
| communication session. |
Communication Codes
Communication codes indicate the communication mode was used for a communication.
Code | Description |
TX | A communication initiated by your fax |
| machine. |
RX | A communication initiated by a remote fax |
| machine. |
POLL RX | Polling Reception |
POLL TX | Polling Transmission |
POLL=** | Bulletin Polling Transmission (** is the Box |
| No.) |
CONF=** | Confidential Reception (**is the Box No.) |
Forwarding Transmission | |
Forwarding Reception | |
B.C. | Broadcast Transmission |