Trilogy™ Manual 1.1
MIDI LEARN
Stores your settings, quits the MIDI setup menu and returns the amp to normal operating mode.
SERIAL:
Press this button to check if all LEDs are working properly. All LEDs on Trilogy™’s front panel must light up for as long as you press and hold SERIAL.
When configuring MIDI setups, BOOST, CRUNCH, SPARKLE and CLEAN serve to indicate the MIDI channel in binary code.
Channel BOOST CRUNCH SPARKLE
1
2
3
4
5
6
7
4.3Factory Settings and How to Restore Them (Factory Reset)
Press and hold the MIDI LEARN and FX ON buttons simultane- ously to reset the amp to the factory default settings. These are:
•OMNI ON
•MIDI channel 1
•All channels are set to FX ON
•SERIAL is deactivated
•All MIDI presets are reset.
The amp ships with the following MIDI channel navigation and
Program change command | Channel | Setting |
|
1) | Clean | FX ON |
|
2) | Clean | Sparkle + FX ON |
|
3) | Crunch | FX ON |
|
4) | Crunch | Boost + FX ON |
|
5) | Lead | FX ON | |
6) | Clean |
|
|
7) | Clean | Sparkle | |
8) | Crunch |
|
|
9) | Ultra Lead | FX ON |
|
8
9
10
11
12
13
14
15
16
FX ON lights up to indicate Trilogy™ is configured to receive incoming program changes via all MIDI channels (default).
If the LED is not illuminated the amp receives messages via the selected channel only.
english
9