B&K 8510 instruction manual Setting information of bar code（6CH）

From 4th to 22nd byte	Information in bar code（ASICmode）
From 23rd to 25th byte	System reserve
26th byte	Sum code

Bar code rule ：All of bar cod of our products is distinguished by the former three characters.

Identity

d

Sub

d

Version

Year

Month

Month

b t h

No. N of one batch

0

0

1

0

0

4

1

0

0

y

y

m m 0

0

2

0

1

0

47. Setting information of bar code（6CH）

1st byte	Start bit ( AAH )
2nd byte	Address (0—0XFE)
3rd byte	Command（6CH）
4th to 22nd byte	Product series number（ASIC code）
24th byte	System reserve
25th byte	System reserve
26th byte	Sum code

48. The return information of command operation in electronic load（12H）

1st byte	Start bit ( AAH )
2nd byte	Address (0—0XFE)
3rd byte	Command（12H）
4th byte	Command calibration result
From 5th to 25th byte	System reserve
26th byte	Sum code

NOTE

Receiving one frame command and verify them

If verify sum is wrong, return the parameter 90H

If setting parameter is wrong or over brim, return parameter A0H.

If command is not enforce, return to parameter B0H

If command is invalid, return to parameter C0H

Otherwise, return to parameter 80H

NOTE

Receiving one frame command and verify them

If verify sum is correct, return the relative reading data

If verify sum is wrong, return the verify command (90H)

54