B&K 8510 Set set up a constant power from 0 to Max power, 000V, Power=*.***W, 000W P*.000W

STEP 3	Enter the original value which displayed in	CURRENT=*.***A
	the VFD or enter a new value by using
	number keys or Rotary knob to adjust the
	voltage value
STEP 4	Press Enter to confirm	0.000V	*.***A

Setup the input current at 4.33A.

Method 1: To set up by using number keyboard

Step1. Press I-set button.

Step2. Press numeric button to enter the current value 4.33.

Step3. Press	Enter	button to confirm the current value.
Method 2: To set up		I-set	by using Rotary SW

(1)If the key board is unlocked by password, directly adjust the Rotary SW button, and voltage will be continually changed from the previews value according the rotation. At the beginning, the cursor will be shown on the last number of the value which is indicated on the VFD, you can move the cursor to the first number, second number etc by using number buttons, and then adjust the Rotary SW to change each number, and let it stay at *.** A. Please see the following description. Then press I-set to confirm the value.

0.00A 0.00V

0.0W 4.33A

Procedure:

Step1. Press I-set button,

Step2. Adjust the Rotary knob to change the value, the operation is as the same as item (1) Step5. Press Enter button to confirm the current value.

P-set (set up a constant power from 0 to Max power)

8500 series electronic load can be set up for a constant power. Constant power setup procedure is as following:

Procedure		Operation details	VFD display
Step 1	Press	P-set	POWER =0.000W
Step 2	Enter a new value by using numeric keys or		POWER=*.***W
	Rotary knob to adjust the voltage value
Step 3	Press	Enter to confirm.	0.000W P:*.000W

R-set (set up a constant resistance from 0.1Ω to 4000Ω)

8500 series electronic load can be setup for a constant resistance. Constant resistance setup procedure is as following:

Procedure

Operation details

VFD display

27