B&K 8510 instruction manual Setting communication address 54H, Enable/Disable Local control mode H

5th byte	The highest byte of time value in timer.
From 8th to 25th byte	System reserve
26th byte	Sum code

Time unit in Timer is S, 1S is represented by 1.

27.Disable / Enable timer of FOR LOAD ON (52H); Reading timer state of FOR LOAD ON (53H)

1st byte	Start bit ( AAH )
2nd byte	Address (0—0XFE)
3rd byte	Command（52H/53H）
4th byte	Timer state (0 is disable ,1 is enable )
From 5th to 25th byte	System reserve
26th byte	Sum code

28. Setting communication address (54H)

1st byte	Start bit ( AAH )
2nd byte	Address (0—0XFE)
3rd byte	Command （54H）
4th byte	New communication address (0~0XFE)
From 5th to 25th byte	System reserve
26th byte	Sum code

29. Enable/Disable LOCAL control mode. (55H)

1st byte	Start bit ( AAH )
2nd byte	Address (0—0XFE)
3rd byte	Command （55H）
4th byte	State of LOCAL button(0:disable,1:enable “)
From 5th to 25th byte	System reserve
26th byte	Sum code

30.Enable / Disable remote sense mode. (56H) Reading the state of remote sense mode. (57H)

1st byte	Start bit ( AAH )
2nd byte	Address (0—0XFE)
3rd byte	Command（56H/57H）
4th byte	Remote mode state (0:disable,1:enable)
5th to 25th byte	System reserve
26th byte	Sum code

31. Selecting / Reading trigger source. (58H/59H)

48