B&K 8510 instruction manual ADC Update Rate High Lowdefault

Page 10

ADC UPDATE RATE

HIGH

LOW<DEFAULT>

TRIGGER SOURCE Choosing the trigger signals source.

		IMMEDIATE<DEF>		Trigger signals from Shift + Trigger key
		EXTERNAL		Trigger signals from the TRIG connector in the rear panel.
		BUS		Communication command trigger mode.
	CONNECT MODE
		MAXTIDLEXING
		SEPARATE<DEF>
	BAUDRATE SET		Setting baud rate.
		4800<DEFAULT>
		9600
		19200
		38400
	COMM. PARITY SET		Command parity setting.
		NONE<DEFAULT>
		EVEN
		ODD
	ADDRESS SET		Setting communication Flow mode
	KEY LOCK SET		Setting keypad password.
			Press	Enter	directly to disable the key lock function.
	EXIT

SYSTTEM SET


	MAX CURRENT SET				Setup the Maximum current.
	MAX POWER SET				Setup the Maximum Power.
	MAX VOLTAGE SET				Setup the Maximum Voltage.
	VOLTAGE ONSET
	VOLTAGE OFFSET
	EXIT
LIST SET
	MODE SET				Setting operation mode.
		FIXED MODE				Fixed mode.
		LIST MODE				Choosing List mode.
	CALL LIST FILE				Recall list operation file.
	EDIT LIST FILE				Edit list operation file.
	LIST STORE MODE				Users can choose 4 kind of memory space to save the list file.
		8 X 120		STEPS		Total 8 files and each file have120 list steps.
		4 X 250		STEPS		Total 4 files and each file have250 list steps.
		2 X 500		STEPS		Total 2 files and each file have500 list steps.
		1 X 1000 STEPS				Total 1 file and each file have1000 list steps.
	EXIT
LOAD ON TIMER
	TIMER STATE				Setting LOAD ON timer state

10

Image 10

Contents Instruction Manual Programmable DC Electronic Load Table of Contents Warranty Information Safety Symbols Quick Reference Front PanelRear Panel Front Panel DisplayKey Pad Immediate Action KeysFront Panel Menus TranPOWER-ON Recall Menu OperationADC Update Rate High Lowdefault Document Orientation Options and AccessoriesGeneral Information Getting Started MapDescription Features and CapabilitiesAccessories Front Panel ControlsRemote Programming Constant Resistance CR ModeConstant Voltage CV Mode Operating ModesTransient Operation Constant Power CW ModeContinuous List Operation Trigger ModePulse Input Control Triggered OperationShort On/Off Operation Range Protection FeaturesInput On/Off Over VoltagePin trigger and remote sensing connectors Over PowerOver Temperature Remote Sense Function and Trigger FunctionSaving and Recalling Settings Wiring diagram for remote senseBattery Testing OperationVon/Voff Operation Action for set Von/Voff valueInspection InstallationLocation Bench Operation Power CordOutline Diagram Input ConnectionsIntroduction Checkout ProcedureTurn-On Checkout Trigger and Remote Sensing ConnectionsDisplay Front Panel OperationCase of Trouble Front Panel DisplayExample PowerSet set up a constant current from 0 to Max current Function keysPOWER=*.***W Set set up a constant power from 0 to Max powerSet set up a constant resistance from 0.1Ω to 4000Ω 000VOn/Off input setting Transition Testing OperationSet set up a constant voltage from 1.5V to Max voltage Shift + StoreContinuous Transient Operation Transition Parameter SettingPulse Transient Operation Toggled Transient Operation StepsList Operation Edit the Testing File Automatic Testing Function of Electronic LoadQuick Recall Function Enter Automatic Testing Setting the Resolution and number of decimal pointsSpecifications Range Accuracy ResolutionIT-E131 RS232 Communication cable Remote Operation ModeCommunication cable IT-E132 USB Communication cableFrame Format Communication between electronic load and PCIT-E132 communication 2AH Selecting the Remote control mode（20H） Communication ProtocolSetting / Reading the max input current .（24H/25H） Setting / Reading max input voltage（22H/23H）Selecting the input on/off state （21H） Setting / Reading max input power（26H/27H） Setting / Reading CV mode voltage value.（2CH/2DH） Setting / Reading CC mode current value（2AH/2BH）Setting / Reading CW mode watt value（2EH/2FH） Setting / Reading CR mode resistance value（30H/31H） 26th byte Sum code Setting /Reading the list repeat mode CH/3DH Setting / Reading the number of list steps EH/3FHSetting / Reading List file name 48H/49H Setting / Reading timer value of for Load on 50H/51H） Save / Get list file in appointed area. CH/4DHEnable/Disable Local control mode H Setting communication address 54HSelecting / Reading trigger source H/59H Sending a trigger signal to trigging the electronic load AH Reading input voltage, current, power and relative state FHEnter the calibration mode（60H） BITGetting the calibration mode state（61H） Calibrate voltage value（62H）Calibrate current value（64H） Setting / Reading calibration information（67H/68H）Store the calibration data to EEPROM（66H） For example： Restore the factory default calibration data（69H）Reading information in bar code 6BH Setting information of bar code（6CH） Service Information Limited One-Year WarrantyDeclaration of CE Conformity Savi Ranch Parkway Yorba Linda, CA