B&K 8510 instruction manual Example, Function keys, Entry Keys, Power

CR	The selected input channel is in the	Rmt	Indicates that the electronic load is in remote
	resistance (CR) mode.		state (RS-232). In the remote state, only the
			active key is the Local key.
Tran	The selected input channel is enabled	Shift	Indicates that the shift key has been pressed.
	for transient operation.
List	A list is initiated or running.	Lock	keyboard is the mode for password

Function keys

Main Function:

Set up a constant current input.

Set up a constant power input.

Set up a constant resistance input

Select CC, CR and CV and CW modes.

Select Current, Resistance and Voltage levels.

Set Trigger and Transient levels.

Set up front panel measurements.

Recall the stored data

Battery testing

Short-circuit testing

Entry Keys

Entry keys let you:

Enter programming values.

Increasing or decreasing setup values.

Press △ or ▽ select the front panel menu parameters.

Power

The Power switch turns the electronic load power on or off.

Example

I-set (set up a constant current from 0 to Max current )

Set up a constant DC current input is the first main function of programmable DC electronic load,

8500 serial electronic load provides two methods to set up the constant DC current input by using the number keyboard and the rotary button. Please see the following operation procedure.

Procedure	Operation details	VFD display
STEP 1	Press I-set	CURRENT=0.000A
STEP 2	Enter the password or jump the step 4 if	PASSWORD:
	your password for reentering

26