B&K 8510 instruction manual Menu Operation, POWER-ON Recall

△Scrolling keys let you move through the commands in the presently selected function men up the next command in the list. Function menus are circular; you can return to the startin position by continuous pressing the key.

▽Go back to the previous command in the list .Function menus are circular; you can return to the starting position by continuous pressing the key.

Enter Confirmation key.

Menu Operation

Press Menu to indicate operation mode .View the menu in VFD and use ▽ and △ to scroll through the complete

menu listed below. When pressing the								Enter	key, you could get the selected menu function. Press	ESC	to
return to the previous menu selection page.
	MENU
	CONFIG
		INITIAL CONFIG					Return to the factory default setup value.
		POWER-ON RECALL					Setting Power-on state of Load.
					ON			When users turn on the electronic load; the electronic load setup value will
								keep the state of last time when users turn off the electronic load.
					OFF<DEFAULT>			Disable this function.
				INPUT RECALL			Setup of the electronic load input state in Power on.
					ON			When users turn on the electronic load; the electronic load input will keep
								the state of last time when users turn off the electronic load.
					OFF<DEFAULT>			When users turn on the electronic load, the electronic load input will keep
								the state off.
				KEY SOUND SET			Keypad sound setting.
					ON<DEFAULT>			Enable key sound.
					OFF			Disable key sound.
				KNOB LOCK SET			Setup Rotary knob lock state.
					ON			Lock Rotary knob.
					OFF<DEFAULT>			Unlock Rotary knob.
			SHORT CUT RECALL				Quickly recall the data stored before
					ON
					OFF＞
			RANG SELECT				Change the measure precision of voltage and current
					ON
					OFF＞
				REMOTE		SENSE	Setup voltage measurement Mode.
					ON			The electronic load will measure input voltage from the remote sense
								connector.
					OFF<DEFAULT>			The electronic load will measure input voltage from the front panel
								connector.

9