Filling with water:
-It is essential to have filled the deposit with water to be able to work with steam.
-Open the lid of the filling mouth.
-Fill the deposit taking care to obser- ve the MAX level (Fig. 1)
Close the lid of the filling mouth.
Use:
-Unroll the cable completely before plugging it in.
-Connect the appliance to the mains.
-Turn the thermostat control to the desired temperature position.
-Do not use temperatures higher than those indicated on the garments to be treated.
•Temperature for synthetic fibres (Polyester, Nylon…).
•• Temperature for silk, wool.
•• • Temperature for cotton. (Mini- mum temperature for steam ironing) Max Temperature for linen.
-If garment has various kinds of fibres, select the temperature for the fibre that requires the lowest temperature. (For example, select the temperature for polyester for an article made out of 60% polyester and 40% cotton).
-Wait until the pilot light (I) has gone out which will indicate that the appliance has reached an adequate temperature.
-During use the pilot light (I) will automatically flash on and off, thus indicating that the heating elements are operating in order to maintain the desired temperature.
Dry ironing:
-The appliance has a steam flow regulator that permits dry ironing (without steam) when placed in the 0 position.
Steam Ironing:
-It is possible to iron with steam whenever the deposit is filled with water and the adequate temperature is selected.
Steam flow control:
-The appliance has a (C) control knob that allows to get the control of the steam flow.
Spray:
-The spray can be used in both steam and dry ironing.
-Press the spray button (A) to use this operation.
-The spray button has to be pressed repeatedly to release the first spray.
Steam blast:
-This function proportions extra steam for eliminating wrinkles.
-Press the steam blast button (B). Wait a few seconds until vapour penetrates the fibres of the garment before pushing the button again. For optimum steam quality, do not apply more than three successive blasts.
-The spray button has to be pressed repeatedly to release the first spray.
Vertical steaming
It is possible to iron hanging curtains, items of clothing on his hanger, etc. To do so, follow the instructions:
- Select the maximum temperature of