Unpacking
NA
!Keep this instruction book on hand in order to refer to it when necessary. Take it you when you move, and should you sell this appliance or pass it on to an other party, make sure that this booklet is supplied along with the appliance so that the new owner may be informed about warnings and suggestions on how the works.
Unpacking
1. Using scissors, cut carefully along one corner post to remove the film.
2. Open the door, check inside the drum and remove the accessories bags.
! Retain all packaging material until installation is complete.
3. Lift of the polystyrene top cap and remove the
four corner posts.
4. Carefully lay the left side of the machine down onto the top cap.
! We reccomend that a second person help to raise and lower the machine.
5.Remove the polystyrene base.
6.! IMPORTANT check when unpacking your machine:
!This is the part of the polystyrene base and should have stayed intact when you removed the base.
If it has broken off and is still in the machine… remove it… while the machine is still laying on its side on the top cap.
7.Stand the machine upright.
Protect the environment Please dispose of the packaging material carefully and considerately.
!Continue to read the rest of these instructions carefully; the following pages contain important information on installation and troubleshooting.
www.aristonappliances.us
5