Operating the washing machine
NA
On-Off / Selecting a program
1.Switch the machine on by pressing the On/Off button.
2.Load your laundry into the machine and shut the door.
A typical wash load
Two wexampes of maximum load for different types of fabric:
3.Add the detergent and any fabric softener.
4.Turn the program selector knob to the required program.
5.Select any options you require (see Option Modifiers).
6.Press the Start/Cancel button to start the program.
•To stop or change a program:
1.Press the Start/Cancel button for 5 seconds.
2.Select ‘Pump out’ 
on the program selector knob.
3.When the machine has finished emptying, turn the program selector knob to the new program required. You may need to add detergent .
4.Press the start button to start the program.
Automatic feature
Unbalance load detection
COTTON 2 Bath Towels
1Hand Towel 6 Shirts
6 Blouses
1 Set of Pyjamas
4 Items of Underwear
2Sheets
=15 Lbs (7 Kg)
SYNTHETICS 2 Children’s Dresses
5 Shirts
5 Blouses
1 Set of Pyjamas
4 Items of Underwear
= 7.5 Lbs (3.5 Kg)
Before washing, you can do a great deal to ensure better results. Divide your garments according to fabric and color. Read the labels, follow their guidelines
The washing machine has an inbuilt feature to prevent it from spinning to fast with an unbalanced load.
When an unbalanced load is detected, the washing machine will attempt to redistribute the load in order to balance it evenly to achieve full spin speed.
If this is not possible and an unbalanced load remains the spin speed will be reduced, depending on the amount of unbalanced detected. This is to prevent the machine from damaging itself or its surroundings and to prevent excessive noise from the washing machine.
If the spin result is unsatisfactory following a reduced spin speed attempt to rectify the unbalanced load, then on completion of the program the load can be redistributed evenly in the drum by hand. Select a spin cycle.
Note: Do not attempt to spin heavy or absorbent single items as the machine cannot distribute these evenly.
If you need to wash a single item you will need to add some other items as ballast to allow the machine to distribute the load evenly throughout the drum.
16 | www.aristonappliances.us |
|