Check list before using | Preparing to | transport the |
the dryer | dryer \ step | by step |
1.Check that steps
2.Ensure that the dryer is connected to the power supply.
3.Open the shutoffnvalve.
4.Read the operating instructions to understand how your dryer operates.
5.Conduct an appliance test:
q Check | that | the | drum is empty. |
q Close | the | dryer | door. |
q Switch | the | dryer | to •Extra Dry" |
and then press the Start button.
q After
6.If the interior of the dryer feels warm, the dryer has been connected properly.
Switch the dryer to •Off".
7.If the dryer does not work, switch the dryer to •Off".
Look in the troubleshooting section (page 23) of the OPERATING INSTRUCTIONS and find the fault.
1.Close the shutnoff valve.
2.Rotate the program selector to •OFF".
3.Pull out the power supply plug or
turn off the circuit breaker.
4.Disconnect gas supply
5.Disconnect the exhaust duct from
the exhaust air outlet on the dryer.
6.Place any accessories in the drum.
7.Close the door and secure with adhesive tape.
8.Screw the heightnadjustable feet of the dryer into the housing to prevent them from being damaged during transportation.
10