Operation / Maintenance and care / Disposal / Information
Q Regenerating / charging empty (used, overcharged) batteries
If the charging station is connected to a battery and the charging process starts it automatically rec- ognises the battery voltage. It changes to pulse charging mode if the voltage is in the range of 7.5 V ± 0.5 to 10.5 V ± 0.5 V.
This pulse charging process is continued until the battery voltage has increased to 10.5 V ± 0.5 V. As soon as this condition is reached, the charging sta- tion changes over to the previously selected normal charging mode.
Now the battery can be charged quickly and safely. Most empty batteries can be charged and used again using this procedure.
QProtective function of the device
If a unexpected situation should occur, such as short circuiting, battery voltage below 7.5 V, open circuit or reversed connection of the output terminals, the charging station deactivates the electronic system and immediately switches back to basic position to avoid damage.
If you do not activate any settings, the system will remain in STANDBY mode. With the inverse con- nection of the output clamps the LED display „in-
correct polarity / fault“ 
5 lights up additionally.
Q Overheatingprotection
If the appliance becomes too hot during charging, the power output is automatically reduced. This protects the appliance from damage.
Q Maintenanceand care
mCaution! Danger of electric shock! Only install, maintain and service the appli- ance when it is disconnected from the mains!
The appliance is maintenance-free.
jSwitch off the appliance.
jClean the plastic surfaces of the appliance and the remote control with a dry cloth. Do not un- der any
QDisposal
The packaging is wholly composed of envi-
Do not dispose of electrical appliances in household waste.
In accordance with European Directive 2002 / 96 / EC on used electrical and electronic appliances and its implementation in national law, used power tools must be collected separately and recycled in an ecologically compatible manner. Please return the tool via the available collection facilities.
Information on options for disposing of electrical appliances after their useful life can be obtained from your local or city council.
QInformation
QServicing
The service centre for your country is shown in the guarantee documentation.
JHave your device repaired only by qualified specialist personnel using original manufactur- er parts only. This will ensure that your device remains safe to use.
JIf the plug or mains lead needs to be replaced, always have the replacement carried out by the manufacturer or its service centre. This will ensure that your device remains safe to use.
GB/IE/CY
11