Hitachi Koki USA NV65AC Do not Overreach, Handle Nailer Correctly, Stay Alert, During Operation

Page 6

English

SAFETY — Continued

WARNING

24.DO NOT OVERREACH.

Keep proper footing and balance at all times.

25.NEVER USE NAILER WHICH IS DEFECTIVE OR OPERATING ABNORMALLY.

If the Nailer appears to be operating unusually, making strange noises, or otherwise appears defective, stop using it immediately and arrange for repairs by a Hitachi authorized service center.

29.HANDLE NAILER CORRECTLY.

Operate the Nailer according to this Manual. Never allow the Nailer to be operated by children, individuals unfamiliar with its operation or unauthorized personnel.

30.NEVER USE NAILER FOR APPLICATIONS OTHER THAN THOSE SPECIFIED IN THIS MANUAL.

26.DO NOT DISCONNECT AIR HOSE FROM NAILER WITH FINGER ON TRIGGER.

The Nailer can fire when re-connected to an air supply.

27.DISCONNECT AIR HOSE FROM NAILER WHEN:

1)doing maintenance and inspection;

2)clearing a jam;

3)it is not in use;

4)leaving work area;

5)moving it to another location; and

6)handing it to another person.

Never attempt to clear a jam or repair the Nailer unless you have disconnected air hose from the Nailer and removed all remaining fasteners from the Nailer. The Nailer should never be left unattended since people who are not familiar with the Nailer might handle it and injure themselves.

28.STAY ALERT.

Watch what you are doing. Use common sense. Do not operate the Nailer when you are tired. The Nailer should never be used by you if you are under the influence of alcohol, drugs or medication that makes you drowsy.

31.HANDLE NAILER CAREFULLY

Because of high air pressure in the Nailer, cracks in the surface are dangerous.

To avoid this, do not drop the Nailer or strike the Nailer against hard surfaces; and do not scratch or engrave signs on the Nailer. Handle the Nailer carefully.

32.MAINTAIN NAILER WITH CARE.

Keep the Nailer clean and lubricated for better and safer performance.

33.USE ONLY PARTS, ACCESSORIES OR FASTENERS SUPPLIED OR RECOMMENDED BY HITACHI.

Unauthorized parts, accessories, or fasteners may void your warranty and can lead to malfunction and resulting injuries.

Only service personnel trained by Hitachi, distributor or employer shall repair the Nailer.

Never modify or alter a nailer. Doing so may cause it to malfunction and personal injuries may result.

IMPORTANT SAFETY INSTRUCTIONS FOR USING

NV83A2 • NV65AC • NV50A1 COIL NAILER

 

WARNING

 

 

1. DO NOT REMOVE DUST COVER.

2. CLOSE NAIL GUIDE AND DO NOT OPEN IT

Fragments of wire collating fasteners can fly out.

DURING OPERATION.

 

If driving fasteners with the nail guide open, the

 

fasteners can be driven away from the workpiece.

— 6 —

Page 5 Page 7
Image 6
Page 5 Page 7
Contents NV 83A2 NV 65AC NV 50A1 Cloueur PeligroContents Definitions of Signal Words Important InformationChoice of Triggering Method is Important SafetyNever Point Tool AT Yourself or Others in Work Area Always Wear EAR and Head ProtectionStore Nailer Properly Keep Work Area CleanCheck for Live Wires Never USE in Presence of Flammable Liquids or GasesHandle Nailer Correctly Do not OverreachNever USE Nailer Which is Defective or Operating Abnormally Disconnect AIR Hose from Nailer WhenEMPLOYER’S Responsibilities Operation Name of PartsNail Selection AccessoriesStandard Accessories NV65ACApplications Optional AccessoriesAIR Supply Before OperationTesting the Nailer LubricationCold Weather Care Adjusting AIR Pressure Loading Nails Nailer Operation Methods of Operation Adjusting the Nailing Depth Disconnect AIR Hose from NailerClearing a jam MaintenanceMaintenance and Inspection Inspecting the push leverMaintenance chart See Operator troubleshooting See Service and RepairsService parts list Inspecting the magazineAction WHY HOW Problem Check Method CorrectionDefinition DES Mots DE Signalisation Information ImportanteSecurite AvertissementMaintenir L’AIRE DE Travail Propre Toujours Porter DES Protections ANTI- Bruit ET UN CasqueRanger LE Cloueur Correctement Verifier LE LEVIER-POUSSOIR Avant L’UTILISATIONDebrancher LE Tuyau D’AIR DU Cloueur Quand Rester SUR SES GardesVerifier S’IL Y a DES Fils Sous Tension Manipuler LE Cloueur CorrectementResponsabilites DE L’EMPLOYEUR NE PAR Retirer LE Couvercle a PoussiereLunettes DE Protection Utilisation NOM DES PiecesAccessoires Standard SpecificationsAccessoires Avertissement Selection DES ClousEnvironnement DE Travail Avertissement Accessoires EN OptionAvant L’UTILISATION Alimentation D’AIRGraissage Entretien PAR Temps FroidEssai DU Cloueur LE Cloueur NE Doit PAS Fonctionner Reglage DE LA Pression D’AIR AvertissementLE Cloueur NE Doit PAS Avoir DE Fuite D’AIR LE Cloueur Doit FonctionnerChargement DES Clous Avertissement Utilisation DU Cloueur Methodes D’UTILISATION Reglage DE LA Profondeur DE Clouage Debrancher LE Tuyau D’AIR DU CloueurToujours Porter DES Lunettes DE Protection Elimination d’un blocage EntretienEntretien ET Inspection Inspection du levier-poussoirRemisage Entretien ET Reparations AvertissementInspection du magasin Liste des pièces de rechangeProbleme Verification Correction Action Pourquoi CommentInformación Importante Definición DE LAS Palabras ClaveLesiones DE Gravedad Seguridad AdvertenciaES Importante LA Elección DE DE Método DE Activación Mantenga EL Área DE Trabajo Limpia Utilice Siempre Protectores Para LOS Oídos Y LA CabezaGuarde Adecuadamente EL Clavador Mantenga a LOS Visitantes AlejadosPermanezca Alerta Compruebe SI HAY Cables ActivosDesconecte LA Manguera DE Aire DEL Clavador Cuando Maneje Correctamente EL ClavadorResponsabilidades DEL Empresario No Quite EL Tapón GuardapolvoGafas Protectoras Para LOS Ojos Operación NomenclaturaSelección DE Clavos Accesorios AdvertenciaAccesorios Estándar Aplicaciones Accesorios OpcionalesSuministro DE Aire Peligro Antes DE LA OperaciónPrecaución LubricaciónCuidados Para Climas Fríos Prueba DEL Clavador PeligroEL Clavador no Deberá Funcionar LA Palanca DE Empuje Deberá Accionarse SIN DificultadEL Clavador no Deberá Tener Fugas DE Aire EL Clavador Deberá FuncionarAjuste DE LA Presión DE Aire Advertencia Carga DE Clavos AdvertenciaEspañol Operación DEL Clavador Métodos DE OperaciónAjuste DE LA Profundidad DE Clavado Desconecte LA Manguera DE Aire DEL ClavadorUtilice Siempre Gafas Protectoras Para LOS Ojos Inspección de la palanca de empuje MantenimientoDesatascado Inspección de los alimentadoresAlmacenamiento Servicio Y Reparaciones AdvertenciaInspección del cargador Lista de repuestosProblema Método DE Comprobación Solución Acción Para Cómo501 503 100 6MM 5MM4MM 75A M6⋅20 109 22C 80A 3MMSteve Reynolds Blvd Norcross, GA Kestrel Road Mississauga on L5T 1Z5
Top Page Image Contents