Bosch Appliances KTS 340 Connection, Licensing with the ESItronic Startcenter, Commissioning TS

	Commissioning �TS ��� 9	en
4. Commissioning	iiThe selected installation language will also be the
	language used in the ESI[tronic] Startcenter.

4.1Connection

Prior to commissioning, make sure the mains voltage matches the voltage specified on the power supply unit (use the power supply lead provided).

4.2Licensing with the ESI[tronic] Startcenter

The KTS 340 is supplied pre-installed and pre-licensed and can be used immediately for control unit diagnosis. The KTS 340 has to be re-licensed to be able to utilize the functions detailed in the purchase contract and to implement further updates. The customer number and password required for this can be found on the delivery note.

!!Do not connect the KTS 340 to the PC/laptop until prompted to do so during the installation routine.

4.2.1Installing the ESI[tronic] Startcenter Procedure:

1. Close all open applications.

2. Insert the "ESI[tronic] Startcenter" DVD.

3.Open the "Windows Explorer".

4.Start D:\setup.exe (D = DVD drive).

??Setup commences.

??The following message appears with WIN Vista:

An unidentified program is attempting to access the computer.

??The following message appears with WIN 7:

Do you wish to allow changes to be made to this computer by the fol- lowing program?

5.Confirm the message with "Allow" or "Yes".

7.Follow the on-screen instructions.

iiSelect the country in which the KTS 340 is to be used in the "Country selection" installation menu. The dialog box does not appear if a country was already selected during an earlier installation of Startcenter (e.g. with KTS 200).

iiIf Adobe Reader is not yet installed on the PC/laptop, it will be installed at the end of the ESI[tronic] Start- center installation routine. Adobe Reader is required to display the KTS 340 control unit diagnosis logs on the PC/laptop.

iiWe recommend that you only install the KTS data packet on the hard disk if you wish to update several KTS units. Then, the ESI[tronic] Startcenter DVD will not be required for update.

??The following message appears with WIN Vista:

Do you wish to install this device software?

8.Confirm the message with "Install".

6.Select the installation language and confirm with <OK>.

Robert Bosch LLC 1 689 989 072 2010-04-06