Bosch Appliances Description of the unit, LED status, KTS 340 Product description, Wlan LED

en

8 KTS 340 Product description

3.5Description of the unit

The KTS 340 is a modular, portable diagnostic system that can be used anywhere. The KTS 340 features a computer unit with memory card and an 8.4 inch LCD touchscreen. ESI[tronic] is pre-installed on the memory card at the factory.

The operator has a choice of a stylus for the LCD touchscreen and an on-screen keyboard.

The KTS 340 and accessories are supplied in a protec- tive case.

					1
8					2
7
	KTS	340
6			Powered by
			ESI	tronic
	max.
	28 V
	5
	4				459843-
				3	5K

Fig. 1: KTS 340

1Stylus holder

2Stylus

3On/Off button

4Power supply unit connection

5USB port

6WLAN LED

7Battery charge LED

8LCD touchscreen

!!There is a risk of injury from glass splinters should the LCD glass cover break.

3.6LED status

3.6.1Battery charge LED

Battery charge LED	Status
Green light	Battery fully charged, external
	power supply connected.
Flashing green	Battery fully charged, external
	power supply not connected.
Yellow light	Battery being charged, external
	power supply connected.
Flashing yellow	Battery almost flat, connect
	external power supply.
Red light	Fault on charging.
Flashing red	Battery flat (KTS 340 will be
	switched off within 2 minutes),
	connect external power supply.

3.6.2WLAN LED

WLAN LED	Status
Green light	WLAN is configured and KTS 340
	is connected to an access point,
	field strength good.
Yellow light	WLAN is configured and KTS 340
	is connected to an access point,
	field strength poor.
Red light	WLAN is configured, KTS 340 is
	not connected to an access point.
Off	WLAN is not configured.

CH2		CH1
		K
	max. 60 V	DIAG

						459843_1Ko
1	2	3	4	5	6	7

Fig. 2: Rear view of KTS 340

1Stylus compartment

2CH2 measurement input

3Ground connection

4CH1(-) measurement input

5CH1(+) measurement input

6Diagnostic cable connection (DIAG)

7Connection for Kensington security lock

1 689 989 072 2010-04-06 Robert Bosch LLC