Bosch Appliances KTS 340 Technical data, General data, Interface protocols, Power supply unit

Technical data �TS 17 en

7.Technical data

7.1	General data
Property		Value/Range
Operating voltage		11 VDC — 34 VDC
Power consumption		approx. 50 W
LCD		8.4"
		800 x 600 pixels
Dimensions (L x W x H)		235 x 290 x 67 mm
		9.25 x 11.42 x 2.64 inch
Weight (without connecting cables)		2100 g
		4.6 lb
Operating temperature		5 °C – 40 °C
		41 °F – 104 °F
Relative humidity		90 % (at 25 °C)
Degree of protection		IP 40

7.2Interface protocols

The following interfaces and their associated protocols are supported for control unit diagnosis in compliance with ISO 15031:

RR ISO/DIS 15765-4 (CAN) - baud rates: 250 kbit/s and 500 kbit/s)

RR ISO 9141-2 Fast

RR ISO/DIS 14230-4 (keyword protocol 2000) 5 bauds RR ISO/DIS 14230-4 (keyword protocol 2000) Fast

RR ISO/DIS 11519-4 (SAE J1850) PWM

RR ISO/DIS 11519-4 (SAE J1850) VPW

7.3Power supply unit

Property	Value/Range
Input voltage	100 VAC — 240 VAC
Input frequency	50	Hz — 60 Hz
Output voltage	15	V
Operating temperature	0 °C — 40 °C

7.4Multimeter specifications

RR CH1 zero potential (blue input may be connected to live measurement points). Input resistance

> 900 kohms.

RR CH2 non-floating (black ground input must be connected to vehicle ground). Input resistance > 900 kohms.

7.4.1DC measurement (CH1 and CH2)

Property	Value/Range
Measuring range	200 mV — 60 V
Accuracy of CH1	±0.75 % of measured value,
	plus ±0.25 % of measuring range
Accuracy of CH2	±2 % of measured value,
	plus ±0.5 % of measuring range
Resolution	100 µV — 100 mV
	(depending on measuring range)

7.4.2Measurement of AC and rms value (CH1 and CH2)*)

Property	Value/Range
AC frequency range	10 Hz — 400 Hz (-3 dB)
Measuring range	200 mV — 60 V
AC accuracy at 100 Hz	±2 % of measured value, plus
rms accuracy at ≤ 100 H	±0.5 % of measuring range
Resolution	100 µV — 100 mV (depending
	on measuring range)

*)	The measuring ranges in measurement modes "U" and "I" are
	specified as peak-to-peak values. Consequently, the digital
	display box is "grayed out" if the set measuring range is briefly
	exceeded (overload).

7.4.3Resistance measurement (CH1)

Property	Value/Range
Measuring range	100  — 1 M
Accuracy up to 200 K	±0.75 % of measured value
	plus ±0.25 % of measuring ran-
	ge
Accuracy up to 1 M	±2 % of measured value
	plus ±0.25 % of measuring ran-
	ge
Resolution	0.1  — 1000 (depending on
	measuring range)
Input resistance	> 9 M

Robert Bosch LLC 1 689 989 072 2010-04-06