HP 640n Print Server manual Kerberos, 8Identity Authentication, Certificates on

Table 5-8Identity Authentication page

Item	Description
Pre-Shared Key	Select the Identity Type. Choose from Distinguished Name, FQDN, E-mail,Key-
	ID, or IP Address.
	Enter the Identity for the identity type that you selected.
	Indicate whether the Identity is ASCII or Hex.
	Enter a pre-shared key (ASCII string) in the Key field. This pre-shared key is shared
	by all hosts specified by this rule. If used, it should be protected. Any host that knows
	this key can be authenticated.
Certificates	Use certificates for authentication. A self-signed HP Jetdirect certificate is pre-
	installed by factory default, which you can replace. In addition, you must install a CA
	certificate for server authentication.
	● Status Indicates whether a certificate is installed.
	● View Display the certificate data of an installed certificate..
	● Configure Manage or install a certificate.
	For information on requesting, configuring and installing certificates, see Configure
	certificates on page 94.
Kerberos	Use Kerberos authentication.
	The status is displayed (Configured or Not Configured).
	To view data for a configured authentication, click View. To configure a new
	authentication, click Configure.

Kerberos

You can configure the HP Jetdirect print server for Kerberos authentication manually, or by importing configuration files. Items on the Kerberos page are described in the following table.

ENWW HP Jetdirect IPsec/Firewall wizard 115