HP 640n Print Server manual Classic control panel EIO menus, Menu Item Description, CFG Network

Classic control panel EIO menus

Classic control panels are provided on older devices that support HP Jetdirect EIO print servers only. Classic control panels typically display two lines of 16 characters each. Use the available device keys to display and select HP Jetdirect settings. Typically, an asterisk (*) identifies the selected value.

Figure C-2Example of Classic Control Panel

Table C-2HP Jetdirect EIO Menu on Classic Control Panel

Menu Item	Description
CFG NETWORK	Access the HP Jetdirect menu. You must set this to YES* each time you want to access the
	menu.
	NO (default): Bypass the HP Jetdirect menu.
	YES: Access the HP Jetdirect menu.
TCP/IP	Enable the selected protocol stack.
IPX/SPX	ON: Enable the protocol.
DLC/LLC	OFF: Disable the protocol.
ATALK	NOTE: The factory default setting depends on the print server model.
CFG TCP/IP	Access the TCP/IP menu and set TCP/IP protocol parameters.
	NO (default): Bypass the TCP/IP menu.
	YES: Access the TCP/IP menu.
	● BOOTP=YES* Enable IPv4 configuration by a BootP Server.
	● DHCP=YES* Enable IPv4 configuration by a DHCP Server.
	If DHCP=YES* and the print server has a DHCP lease, you can configure the following
	DHCP settings:
	◦ RELEASE: Select whether to release (YES) or save (NO) the current lease.
	◦ RENEW: Select whether to renew (YES or NO) the lease.
	● AUTO IP=YES* Automatically assign a link-local IPv4 address in the form 169.254.x.x.

ENWW Classic control panel EIO menus 189