HP 640n Print Server AppleTalk Enable, Security Print Sec, IPsec or Firewall, Reset Security

Table C-1HP Jetdirect EIO Menu on Graphical Control Panel (continued)

Menu item	Sub-menu item	Sub-menu item	Values and Description
AppleTalk	Enable		Off: Disable the AppleTalk protocol.
			On: Enable the AppleTalk protocol.
			NOTE: The factory default setting depends on the
			print server model.
DLC/LLC	Enable		Off: Disable the DLC/LLC protocol.
			On: Enable the DLC/LLC protocol.
			NOTE: The factory default setting depends on the
			print server model.
Security	Print Sec Page		Yes: Print the current IPsec security settings.
			No (default): Do not print the current settings..
			NOTE: Displays only if IPsec is supported on the
			print server.
	Secure Web		Require encrypted communication between a browser
			and the HP Embedded Web Server.
			HTTPS Required: Only HTTPS access is accepted.
			The print server appears as a secure site.
			HTTP/HTTPS Optional: Access using either HTTP or
			HTTPS.
			NOTE: The factory default setting depends on the
			print server model.
	IPsec or Firewall		Specify the IPsec or Firewall status on the print
			server.
			Keep: Retain IPsec/Firewall configuration.
			Disable: Disable IPsec/Firewall operation on the print
			server.
			NOTE: Displays IPsec if the print server supports
			both IPsec and Firewall. Displays Firewall if the print
			server does not support IPsec..
	Reset Security		Reset security settings on the print server to factory
			defaults.
			No (default): Retain current security settings.
			Yes: Reset security settings to factory defaults.
	802.1X		Reset 802.1X settings on the print server to factory
			defaults.
			No (default): Retain current 802.1X settings.
			Yes: Reset 802.1X settings to factory defaults.

184 Appendix C HP Jetdirect control panel menus (V.45.xx.nn.xx) ENWW