HP 640n Print Server manual TCP/IP LPD Queues

Table 3-3Telnet Commands and Parameters (continued)

interlock	Require an acknowledgement (ACK) on all TCP packets before the printer can close a
	port 9100 print connection. Specify a port number and parameter value. For the
	HP Embedded Web Server on the HP Jetdirect print server, the default port number is 1.
	In the following example, the port is 1 and interlock is enabled:
	interlock 1 1
	0 (default): Disable interlock.
	1: Enable.
mult-tcp-conn	Allow multiple TCP connections (restrict the use of multiple ports).
	0 (default): Enable multiple connections.
	1: Disable multiple connections (allow only one connection).
buffer-packing	Pack the data buffer on TCP/IP packets before sending.
	0 (default): Enable. Pack the data buffer before sending to the printer.
	1: Disable. Data is sent to the printer as it is received.
write-mode	Set the TCP PSH flag for device-to-client data transfers.
	0 (default): Disable.
	1: Enable the all-push option, which sets the push bit in all data packets.

TCP/IP LPD Queues

addq

deleteq

defaultq

Add a user-defined queue. Specify the queue name, prepend string name, append string name, and the processing queue (typically, RAW) in the command line. Enter up to 32 alphanumeric characters. Add up to six user-defined queues.

CAUTION: Do not use lowercase and uppercase characters to differentiate queue names. Management of LPD queues by other tools can cause unpredictable results.

Set a user-defined deletion queue. Specify the queue name in the deleteq command line.

Set the queue name to use when the specified queue for a print job is unknown. The default queue name is: AUTO

addstring	Specify a user-defined character string to prepend or append to print data. You can add
	up to eight character strings. Specify the string name and the character string in the
	addstring command line.
deletestring	Set a user-defined deletion string. Specify the string name in the deletestring
	command line.
TCP/IP Raw Print Ports
raw-port	Additional ports for printing to TCP port 9100. Valid ports are application dependent and
	range between 3000 to 9000. You can add up to two ports.
TCP/IP Access Control

ENWW IPv4 configuration 49