Fujitsu ASU36CLX1, INVERTER manual En-11, To select Swing Operation Press the Swing button T

SWING OPERATION

Begin air conditioner operation before performing this procedure.

To select SWING Operation

Press the SWING button (Fig. 6 T).

The SWING Display (Fig. 7 b) will light.

Each time the SWING button is pressed, the swing operation will change in the following order.

Up/down swing operation Left/right swing operation

Swing operation stops Up/down/left/right swing operation

To stop SWING Operation

Press the SWING button and select STOP.

Airflow direction will return to the setting before swing was begun.

About Swing Operation

●Up/down swing: Swing operation begins using the following range according to the current airflow direc- tion.

Airflow direction is 1–4 (for cooling, dry).

With the upper airflow-direction louver in the hori- zontal position, the lower airflow-direction louver moves (swings) to direct airflow to a wide area.

●Left/right swing: The airflow-direction louvers move (swing) in the left/right airflow direction.

●Up/down/left/right swing:The airflow-direction louvers move (swing) in both the up/down and left/right airflow directions.

●The SWING operation may stop temporarily when the air conditioner’s fan is not operating, or when operating at very low speeds.

●If the SET button (Vertical) is pressed during the up/ down swing operation, the up/down swing operation will stop and if the SET button (Horizontal) is pressed during the left/right swing operation, the left/right swing operation will stop.

En-11

9315345363_OM.indb Sec1:11

9/16/2010 2:48:51 PM