Kenmore 385.16231 Bar Tacking, Width, To &5, Stitch iength Any @ Needle thread tension Feed dogs

Bar Tacking

(_ Stitch	selector:		5
(_) Stitch width:			2 to 6.5
(_) Stitch	length:		0,,5to	1
@ Needle		thread tension:	2 to 6
(_) Presser		foot A:	Zigzag	foot

This is similar to a very short satin stitch, and is used to reinforce points of strain such as corners, pockets and straps of lingerie°

Sew four (4) to six (6) stitches, (_) Bar tack

@

®®

Embroidery

Stitch	selector:	5
_Stitch	width:	1 to &5
(_) Stitch iength:		Any
@ Needle thread tension:		2 to 6
(_) Feed dogs:		Dropped
* Presser foot:		Remove

Drop the feed dogs, and then remove the foot holder.	f
Adjust stitch width as desired. Draw a design onto the
fabric with tailor's chalk. Stretch the fabric between
embroidery hoops, and then place the fabric under the
needle..
Lower the presser foot lifter to engage the needle thread
tension. Holding the needle thread in your left hand, rotate
the handwheel counterclockwise for one complete turn.
Pul! the needle thread to draw the bobbin thread to the right
(top) side of the fabric, At medium speed, stitch along the
marked outline, guiding the fabric carefully by hand. After
embroidery is completed, raise the feed dogs for normal
sewing.

@

}

®®

J

56